manual method to reset TCP/IP
The reset command is available in the IP context of the NetShell utility. Follow these steps to use the reset command to reset TCP/IP manually:
- To open a command prompt, click Start and then click Run. Copy and paste (or type) the following command in the Open box and then press ENTER:
- At the command prompt, copy and paste (or type) the following command and then press ENTER:
netsh int ip reset c:\resetlog.txt
Note If you do not want to specify a directory path for the log file, use the following command:netsh int ip reset resetlog.txt
- Reboot the computer.
Categorised as: Microsoft, Networking
Leave a Reply
You must be logged in to post a comment.