Memorise

Exchange 2003 with iPhone

Exchange 2003 with iPhone
Things to remember:
Exchange is SP2 is minimum requirement and install all latest patch is recommended.

Microsoft Exchange 2003 has Service Pack 2 Installed
I would also install .Net framework 3.5 or above as well, as we are dealing with IIS and website.

Test IIS (Internet Information Server) components for proper connectivity (check event log for OMA error)
Open your browser and type:  http://your-exchange-server-external–dns-name/oma
(Outlook Mobile Access) if you are using https then use that https instead of http.
Open your browser and type:  http://your-exchange-server-external–dns-name/exchange
(Outlook Webmail Access) if you are using https then use that https instead of http.

Configure iPhone to your Exchange Server

There only FOUR components that are typically necessary for a proper exchange – iPhone setup

1. Email Address
2. Exchange User Id
3. Exchange Password
4. Server Address (Also known as Outlook Web Address)

If you have error on OMA try the instruction below

Method 2

Important Method 2 should be used only in an environment that has no Exchange Server 2003 front-end server. The registry changes should be made only on the server on which the mailboxes are located.

Create a secondary virtual directory for Exchange that does not require SSL, and then add a registry value to point to the new virtual directory.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Note These steps affect both Outlook Mobile Access connections and Exchange ActiveSync connections. After you follow these steps, both Outlook Mobile Access and Exchange ActiveSync connections use the new virtual directory that you create.

Disable the forms-based authentication for the Exchange virtual directory

To create a secondary virtual directory for Exchange that is based on steps 1 through 7 of the following procedure, make sure that forms-based authentication is disabled for the Exchange virtual directory before you make the copy. Before you follow these steps, disable forms-based authentication in Exchange System Manager. Then restart Internet Information Services (IIS). To do this, follow these steps:

1. Open Exchange Manager.
2. Expand Administrative Groups, expand the first administrative group, and then expand Servers.
3. Expand the server container for the Exchange Server 2003 server that you will be configuring, expand Protocols, and then expand HTTP.
4. Under the HTTP container, right-click the Exchange Virtual Server container, and then click Properties.
5. Click the Settings tab, clear the Enable Forms Based Authentication check box, and then click OK.
6. Close Exchange Manager.
7. Click Start, click Run, type IISRESET/NOFORCE, and then press ENTER to restart Internet Information Services (IIS).

Create a secondary virtual directory for Exchange server

You must use Internet IIS Manager to create this virtual directory for Exchange ActiveSync and Outlook Mobile Access to work. If you are using Windows Server 2003, follow these steps:

1. Start Internet Information Services (IIS) Manager.
2. Locate the Exchange virtual directory. The default location is as follows:

Web Sites\Default Web Site\Exchange

1. Right-click the Exchange virtual directory, click All Tasks, and then click Save Configuration to a File.
2. In the File name box, type a name. For example, type ExchangeVDir. Click OK.
3. Right-click the root of this Web site. Typically, this is Default Web Site. Click New, and then click Virtual Directory (from file).
4. In the Import Configuration dialog box, click Browse, locate the file that you created in step 4, click Open, and then click Read File.
5. Under Select a configuration to import , click Exchange, and then click OK.

   A dialog box will appear that states that the “virtual directory already exists.”

6. Select the Create a new virtual directory option. In the Alias box, type a name for the new virtual directory that you want Exchange ActiveSync and Outlook Mobile Access to use. For example, type exchange-oma. Click OK.
7. Right-click the new virtual directory. In this example, click exchange-oma. Click Properties.

10.  Click the Directory Security tab.

11.  Under Authentication and access control, click Edit.

12.  Make sure that only the following authentication methods are enabled, and then click OK:

• Integrated Windows authentication
• Basic authentication

13.  On the Directory Security tab, under IP address and domain name restrictions, click Edit.

14.  Click the option for Denied access, click Add, click Single computer and type the IP address of the server that you are configuring, and then click OK twice.

15.  Under Secure communications, click Edit. Make sure that Require secure channel (SSL) is not enabled, and then click OK.

16.  Click OK, and then close the IIS Manager.

17.  Click Start, click Run, type regedit, and then click OK.

18.  Locate the following registry subkey:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MasSync\Parameters

19.  Right-click Parameters, click to New, and then click String Value.

20.  Type ExchangeVDir, and then press ENTER. Right-click ExchangeVDir, and then click Modify.

NoteExchangeVDir is case-sensitive. If you do not type ExchangeVDir exactly as it appears in this article, ActiveSync does not find the key when it locates the exchange-oma folder.

21.  In the Value data box, type the name of the new virtual directory that you created in step 8. For example, type /exchange-oma. Click OK.

22.  Quit Registry Editor.

23.  Restart the IIS Admin service. To do this, follow these steps:

1. Click Start, click Run, type services.msc, and then click OK.
2. In the list of services, right-click IIS Admin service, and then click Restart.

24.  If you want to reuse Forms-based Authentication on the Exchange server, follow these steps to re-enable Forms-based Authentication on the /Exchange virtual directory in Exchange System Manager.

1. Open Exchange Manager.
   1. Expand Administrative Groups, expand the first administrative group, and then expand Servers.
   2. Expand the server container for the Exchange Server 2003 server that you will be configuring, expand Protocols, and then expand HTTP.
   3. Under the HTTP container, right-click the Exchange Virtual Server container, and then click Properties.
   4. Click the Settings tab, click to select the Enable Forms Based Authentication check box, and then click OK.
   5. Close Exchange Manager.
   6. Click Start, click Run, type IISRESET/NOFORCE, and then press ENTER to restart Internet Information Services (IIS).

Note If the server is Microsoft Windows Small Business Server 2003 (SBS), the name of the Exchange OMA virtual directory must be exchange-oma.

The integrated setup of Microsoft Windows Small Business Server 2003 creates the exchange-oma virtual directory in IIS. Additionally, it points the ExchangeVDir registry key to /exchange-oma during the initial installation. Other SBS wizards, such as the Configure E-mail and Internet Connection Wizard (CEICW) also expect the virtual directory name in IIS to be exchange-oma.

Tagged with:

Categorised as: Microsoft, Networking