Memorise

manual method to reset TCP/IP

The reset command is available in the IP context of the NetShell utility. Follow these steps to use the reset command to reset TCP/IP manually:

1. To open a command prompt, click Start and then click Run. Copy and paste (or type) the following command in the Open box and then press ENTER:
   cmd
2. At the command prompt, copy and paste (or type) the following command and then press ENTER:
   netsh int ip reset c:\resetlog.txt

   Note If you do not want to specify a directory path for the log file, use the following command:

   netsh int ip reset resetlog.txt
3. Reboot the computer.

Tagged with:

Categorised as: Microsoft, Networking