Memorise

Archive for January, 2012

ScreenOS Configure Backup Internet Interface with Automatic Failover

Version: 6.0 and higher  Network Topology: Two firewall interfaces configured in untrust zone.  One for each internet service provider. Description: You can setup a second internet service as a configured backup line for use during failure on the primary line.  This utilizes interface backup and the track-ip features of ScreenOS 6. This will automatically do […]

Reset Juniper SSG firewall using pinhole on the device

Using the device status LEDs: 1. Locate the Reset (or Reset Config) pinhole on the device. Using a thin wire (such as a straightened paperclip), push the pinhole button for four to six seconds. The Status LED blinks red. NOTE: If you do not follow the complete sequence, the reset process cancels without any configuration […]