Memorise

Using the device status LEDs: 1. Locate the Reset (or Reset Config) pinhole on the device. Using a thin wire (such as a straightened paperclip), push the pinhole button for four to six seconds. The Status LED blinks red. NOTE: If you do not follow the complete sequence, the reset process cancels without any configuration […]

Share your thoughts on this

This config assumes that you are using ports 0/8 and 0/9 for trust and untrust.  Plus you need to define 2 HA ports as well to connect the firewalls heartbeat and session information I used ports 0/0 and 0/1.   SSG1 set interface “ethernet0/0” zone “HA” set interface “ethernet0/1” zone “HA” set nsrp cluster id […]

Share your thoughts on this