Memorise

Archive for the ‘OS X’ Category

Outlook on a Mac Keeps asking for password

I have deleted/repaired keychain but nothing has worked. It does save password for a few hours, but then forgets it. For Exchange I had this problem and a few others – this is how I fixed it: Take a note of exchange server settings in Outlook->Preference, select the account click advance. Locate your account setup file […]

Shrew Soft Mac OSX vpn client

Shrew Soft have a Mac OSX port of the VPN client based on the head ( 2.2.x ) sources. It seems that it requires more testing, but it appears to be more or less stable. There are two requirements / dependency before running the native install package (.dmg file) 1) Install the LGPL Qt Framework […]

Adjusting Mac Mail Mark As Read Behavior from the Command Line

Adjusting Mail Mark As Read Behavior from the Command Line Launch the Terminal Set the delay to 2 seconds with the following: defaults write com.apple.Mail MarkAsReadDelay 2 Replace the two on the end with any number to change the delay to that many seconds.  You can also remove the delay with the following defaults write command: defaults […]

How to make a bootable OS X 10.10 Yosemite install drive

Connect to your Mac a properly formatted 8GB (or larger) drive, and rename the drive Untitled. (The Terminal command used here assumes the drive is named Untitled.) Also, make sure the Yosemite installer, called Install OS X Yosemite.app, is in its default location in your main Applications folder (/Applications). This means that if you moved […]

Handy Light – Instruction

Handy Light – Instruction Do this after the setup below, Blue, yellow, Red then touch top right corner, screen should change to purple. Set up an ad hoc Wi-Fi network on your computer (network name and password requirement are not important). Connect to the Wi-Fi network you just created on your iPhone through the Settings/Wi-Fi […]

OS X Lion Upgrade made Internet running slow

I installed the Mac OS X Lion from the App Store this morning and after cannot connect to internet or internet is running very very slowww. after reading the varies forum some people suggesting rebooting fixed the issue, or changing the DNS address to open DNS or disconnecting from wireless and reconnecting got them running but still […]

VMWare Fusion Change vmnet1 IP address

You can change ip address using ifconfig command itself. You can use Terminal. you will need permission to change the IP, use su Shirajs-MacBook-Pro:~ shiraj$ su Password: sh-3.2# To set IP address 192.168.200.1, enter command: # ifconfig vmnet1 192.168.200.2 netmask 255.255.255.0 up # ifconfig vmnet1   you can change the /Library/Application Support/VMWare Fusion/vmnet1/dhcpd.conf and have […]